original link https://forums.oracle.com/forums/thread.jspa?threadID=2227554
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
– Converting Red Hat based Oracle XE installer to Ubuntu.
– Work-around for missing /sbin/chkconfig tool.
– Install Oracle XE into a different directory or disk volume.
– Relocate and configure the Oracle user and default login directory.
– Uninstall, reconfigure and perform first database backup.
– Notes and web links.
– Troubleshooting
A) System Setup and Prerequisites
A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > Terminal
The following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_name
A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbc
The following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vim
A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo ‘/swapfile swap swap defaults 0 0’ >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -s
A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744
A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select “ext3″ filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID=”d19a2d8f-da43-4802-8bdb-0703c855e23a”
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the system
You can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01
C) Oracle 11g XE Download and Installation
C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien –to-deb –scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)
C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on /sbin/chkconfig, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
echo >> $file
echo ‘### BEGIN INIT INFO’ >> $file
echo ‘# Provides: OracleXE’ >> $file
echo ‘# Required-Start: $remote_fs $syslog’ >> $file
echo ‘# Required-Stop: $remote_fs $syslog’ >> $file
echo ‘# Default-Start: 2 3 4 5’ >> $file
echo ‘# Default-Stop: 0 1 6’ >> $file
echo ‘# Short-Description: Oracle 11g Express Edition’ >> $file
echo ‘### END INIT INFO’ >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
C.3. Install and configure Oracle XE
sudo dpkg –install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfig
C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk ‘{print $2}’`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)
C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo ‘. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh’ >> /home/oracle/.bashrc
C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su –
-> Enter Oracle account password
C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su – oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exit
D) Unintstall, Reconfigure and Troubleshooting
D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su –
/etc/init.d/oracle-xe stop
dpkg –purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe remove
D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configure
D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su – oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Database
E) Notes
E.1. Oracle 11g XE limitiations overview
– It will consume, at most, processing resources equivalent to one CPU.
– Only one installation of Oracle Database XE can be performed on a single computer.
– The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
– The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
– HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
F) Troubleshooting
… in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.
perpetuallybeta 